Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Orlando, FL
Furnace repair in Orlando typically costs between $150 and $500 for most fixes, with common issues like ignitor replacements and flame sensor cleanings landing on the lower end and blower motor or heat exchanger work pushing toward the higher end. Halden Heating and Air Orlando handles the full range, and every job starts with a written price before any work begins. If your furnace is blowing cold air, short cycling, or making sounds it shouldn’t, call us at (850) 695-3178 and a real person answers, day or night.
Most Orlando homeowners don’t think about their furnace until a cold snap hits in January and the system won’t kick on. That’s exactly when furnaces fail, because they’ve been sitting idle since March. Our Heating & Furnace in Orlando service covers everything from routine maintenance to full system replacement, and furnace repair sits right in the middle of what we do most weeks from December through February. Andre Fuller has been running heating and air work in this market since 2004, and the furnace calls we get in Orlando share a few patterns worth knowing about.
Here’s what you can expect: you book online, you get a live arrival time, and you track your technician to your door. No four-hour windows. No wondering if anyone is coming. And before the tech picks up a single tool, you’ll have a written price in hand. That’s how we’ve done it since day one, and it’s the only way we know how to run a furnace repair call.
When You Need Furnace Repair
Orlando’s furnaces don’t run as hard as systems up north, but they fail in predictable ways. Humidity, extended idle periods, and the occasional near-freezing night all take a toll. Here are the symptoms that tell you it’s time to call:
- The blower runs but the air is cold or lukewarm. This usually means the burners aren’t igniting or the flame sensor is dirty. In neighborhoods like Baldwin Park and College Park, we see this a lot on systems that haven’t been serviced in two or three years.
- The furnace short cycles. It kicks on, runs for a minute or two, then shuts off. Often it’s a dirty flame sensor or an overheating limit switch. Left alone, short cycling strains the blower motor and shortens the system’s life.
- There’s a burning smell when the heat first comes on. Dust burning off after months of disuse is normal and fades within an hour. A smell that persists usually means something else is wrong, like a clogged air filter or an overheating component.
- You hear banging, popping, or rattling. Popping can come from expanding metal in the ductwork, which is mostly annoying. Banging from inside the cabinet is different and often points to a delayed ignition or a failing blower wheel.
- The pilot light or ignitor won’t fire. Older systems use a standing pilot, newer ones use a hot surface ignitor or intermittent pilot. When the ignitor fails, you get no heat at all. It’s a common repair on Carrier and Goodman furnaces in the Orlando area.
- The furnace won’t turn on at all. We check the thermostat, the breaker, and the safety switches first. If it’s not one of those, it’s usually the control board or a draft inducer motor, both of which we diagnose on the first visit.
Our Furnace Repair Process
We built our process around the idea that you should know what’s happening at every step. No surprises, no mystery pricing, no waiting around wondering. Here’s how a furnace repair call works with Halden Heating and Air Orlando:
- You book online or call (850) 695-3178. A real person answers 24/7. You pick a time that works, and you get a confirmation immediately.
- You get a live arrival time and can track your tech. Before the technician heads your way, you’ll see who’s coming and when they’ll arrive. You can follow their progress to your door, so you’re never guessing.
- The technician diagnoses the furnace and explains what they found. Our techs are trained on Carrier, Trane, Lennox, and Goodman systems, among others. They’ll show you the problem in plain English, not jargon.
- You get a written price before any work starts. This is non-negotiable. You see the number, you approve it, and only then does the repair begin. No door-step price changes, ever.
- The repair is completed and tested. The tech runs the furnace through a full cycle, checks the temperature rise, and confirms everything is firing correctly before they leave.
- You get a written guarantee on the repair. Every furnace repair comes with our 365-Day Done Right Promise in writing. If the repair fails within the coverage window, we come back free. That’s the Relay Visibility Guarantee, and it’s automatic, not an add-on.
Furnace Repair Pricing in Orlando
Furnace repair costs in Orlando fall into a predictable range depending on the part and labor involved. Most repairs we do run between $150 and $500. Here’s a breakdown of what we typically see across the city, from MetroWest to Lake Nona:
| Repair Type | Typical Cost in Orlando |
|---|---|
| Flame sensor cleaning or replacement | $90 – $180 |
| Ignitor replacement | $160 – $320 |
| Thermostat replacement | $120 – $300 |
| Draft inducer motor | $280 – $550 |
| Blower motor replacement | $350 – $700 |
| Control board replacement | $250 – $550 |
| Heat exchanger replacement | $900 – $1,800 |
Several things move the price. Age of the system matters: a 20-year-old furnace with obsolete parts costs more to fix than a 7-year-old unit with common components. The brand matters too. Some Trane and Lennox parts carry a premium, while Goodman and Carrier parts are often more readily available in Orlando. And the specific fault matters most of all. A dirty flame sensor is a 30-minute fix. A cracked heat exchanger is a major repair that sometimes means replacing the furnace instead.
Every estimate is free. You’ll know the number before you commit, and it won’t change when the tech arrives. That’s the whole point. If you’re weighing repair versus replacement, we’ll walk you through both numbers honestly, including what makes sense for an Orlando home where the furnace runs maybe 10 to 12 weeks a year.
FAQs – Furnace Repair
How much does furnace repair cost in Orlando?
Most furnace repairs in Orlando run between $150 and $500, with simple fixes like flame sensor cleaning at the low end and blower motor or control board replacements at the higher end. Heat exchanger replacement can exceed $1,500 and sometimes makes replacement the smarter financial choice. Call (850) 695-3178 for a free estimate with a written price before any work begins.
Can you fix my furnace the same day I call?
Yes. We run same-day service across Orlando and the surrounding area, with live arrival times and technician tracking so you know exactly when we’ll show up. Our phones are answered 24/7 by a real person, not a voicemail tree, so you can book a repair at midnight if your furnace dies on a cold night.
Is it cheaper to repair or replace a furnace?
If the repair is under $500 and your furnace is less than 12 years old, repair is almost always the better call. If you’re looking at a $900-plus heat exchanger repair on a system that’s 15 years or older, replacement usually makes more sense in Orlando, especially since our mild winters mean you want reliability, not a system that limps along. We’ll give you honest numbers for both options and let you decide.
Which brands do you repair?
We service all major furnace brands, including Carrier, Trane, Lennox, and Goodman, along with Rheem, York, Daikin, Bryant, and American Standard. Our technicians carry common ignitors, flame sensors, and control boards for most models, which means many repairs get done in a single visit.
What if the repair fails after you leave?
Every furnace repair comes with a written guarantee under our 365-Day Done Right Promise. If the fix fails within the coverage window, we come back at no charge. No arguing, no fine print. It’s automatic, and it’s part of the Relay Visibility Guarantee we’ve followed since 2004.
Why Homeowners in Orlando Call Halden
The HVAC industry has a reputation for phone tag, vague arrival windows, and pricing that changes at the door. We built Halden Heating and Air Orlando to be the opposite. Home comfort shouldn’t require a leap of faith about who’s coming to your house or what they’ll charge.
Andre Fuller and the team handle furnaces across the Orlando metro, including Winter Park, Maitland, Altamonte Springs, and the neighborhoods around downtown. The systems here face specific conditions: high humidity that corrodes connections, long idle stretches that let dust settle on sensors and burners, and occasional cold fronts that send a hundred homeowners calling on the same morning. We plan for that. Our techs carry the parts that fail most often in this climate, and our scheduling system is built to handle surge days without dropping calls or pushing people to next week.
Every job includes a written price before work starts, a written guarantee on the repair, and a free second visit if the repair fails. Those aren’t optional upgrades or “protection plans.” They’re the baseline. If you’re booking a furnace repair in Orlando, you should expect nothing less.
Call Halden Heating and Air Orlando for Furnace Repair
If your furnace isn’t heating or it’s making sounds that worry you, don’t wait through another cold night. Call (850) 695-3178 and you’ll get a real person on the line, 24/7. You can also book online, get a live arrival time, and track your technician to your door. We’ll diagnose the problem, hand you a written price, and get your heat running again, backed by the 365-Day Done Right Promise.
Written by Andre Fuller, Owner at Halden Heating and Air Orlando, serving Orlando.